Ascii Code Recognition Range Setting; Vin - Inateck P7 User Manual

3.4.4 ASCII Code Recognition Range Setting

Code 39 can include all ASCII characters. By default, the P7 disables Code 39 Full ASCII which
means it only reads some ASCII characters. You can enable Code 39 Full ASCII via setting.
Enable Code 39 Full ASCII
(*) Disable Code 39 Full ASCII
For example, steps to enable Code 39 Full ASCII are as follows:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 39 Full ASCII" barcode;
3. Read the "Exit with Save" barcode.
Enter setup
Exit with save
Exit without save

3.4.5 VIN

Code 39 can be used to make VIN (Vehicle Identification Number), which consists of 17
characters. Inateck P7 defaults "Disable VIN".
Enable VIN
（*）Disable VIN
41