Chapter 3 Symbology Settings; Codabar; Enable / Disable Codabar - Inateck P6 User Manual

Chapter 3 Symbology Settings

3.1. Codabar

3.1.1. Enable / Disable Codabar

Decide whether to enable Codabar through selecting correspondent barcode below. The
Inateck P6 Scanner defaults enable Codabar contents.
(*)Transmit Codabar Start/Stop Do not Transmit Codabar Start/Stop
Characters Characters
Enter Setup Exit with Save
Exit without Save
For example: Do Not Transmit Codabar Start/Stop Characters.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Codabar" barcode; (If Codebar is disabled, it is needed to enable it);
3. Read the "Do Not Transmit Codabar Start/Stop Characters" barcode;
4. Read the "Exit with Save" barcode.
30