Code 93; Enable/Disable Code 93 - Inateck P7 User Manual

Operations are as below if you want to enable first character of Code 32:
1. Read the "Enter Setup" barcode;
2. Read the "Enable first character of Code 32" barcode;
3. Read the "Exit with Save" barcode.
Enter setup
Exit with save
Exit without save

3.5 Code 93

3.5.1 Enable/Disable Code 93

Decide whether to read Code 93 by scanning correspondent barcode below. Inateck P7 defaults
Enable Code 93.
（*）Enable Code 93
Disable Code 93
Note: Read the "Disable Code 93" barcode will make the scanner not able to read the Code 93
barcode. Thus, if the scanner cannot read the Code 93 barcode, please try to read "Enable Code
93" to reset.
Operations are as below if you want to enable Code 93:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 93" barcode;
3. Read the "Exit with Save" barcode.
43