English Note: 1). This user manual is not applicable to the BCST-50 whose SN starts with digit 8. Please download the corresponding manual if you have such barcode scanners at hand. 2). The factory default setting is indicated by an asterisk ʻ*ʼ.
4. Bluetooth HID and SPP modes BCST-50 has Bluetooth capability that supports data transmission under two modes including HID and SPP. When under HID mode, the BCST-50 connects your phone or computer automatically after pairing successfully. You can open a text editor programon your computer or phone to receive barcode information then.
6. Time interval setting to read the same barcode After reading a barcode, the scanner will not read the duplicate one within a certain time interval you set. Default: 0.5s, Setting range: 0-9.9s. The function is only available under Continuous Scanning Mode and Auto-induction Mode. To set the time interval to read duplicate barcodes, for example: 6.1 To set the time interval to 0.5s, please scan the barcode below, and then scan "0"...
Page 6
7.3 Enable to read all 2D codes Enable to read all 2D codes Disable to read all 2D codes 7.4 UPC-A 7.4.1 Scan the two-dimensional codes below to read/not to read UPC-A (*)Enable UPC-A Disable UPC-A 7.4.2 UPC-A Number System Character & Country Code (*) Output Number System Character Do Not Output Number System Character &...
Page 7
7.4.3 UPC-A Check Digit Do Not Output UPC-A Check Digit (*)Output UPC-A Check Digit 7.4.4 UPC-A Additional Code a. UPC-A Two Digits Additional Code (*)Disable Enable b. UPC-A Five Digits Additional Code Enable (*)Disable 7.5 UPC-E 7.5.1 Scan the two-dimensional codes below to read/not to read UPC-E (*)Enable Disable...
Page 8
7.5.2 UPC-E Number System Character & Country Code (*) Output Number System Character Do Not Output Number Output Number System Character &Country Code 7.5.3 UPC-E Check Digit Do Not Output UPC-E Check Digit (*)Output UPC-E Check Digit 7.5.4 UPC-E Additional Code a.
Page 9
b. UPC-E Five Digits Additional Code (*)Disable Enable 7.5.5 Convert UPC-E to UPC-A Enable (*)Disable 7.5.6 Convert UPC-A to EAN-13 (*)Disable Enable 7.5.7 UPC-E1 (*)Disable Enable...
Page 10
7.6 EAN-8 7.6.1 Scan the two-dimensional codes below to read/not to read EAN-8 (*)Enable Disable 7.6.2 EAN-8 Check Digit Disable (*)Enable 7.6.3 EAN-8 Additional Code a. EAN-8 Two Digits Additional Code (*)Disable Enable b. EAN-8 Five Digits Additional Code (*)Disable Enable...
Page 11
7.7 EAN-13 7.7.1 Scan the two-dimensional codes below to read/not to read EAN-13 Disable (*)Enable 7.7.2 EAN-13 Check Digit (*)Enable Disable 7.7.3 ISBN (*)Disable Enable 7.7.4 ISSN (*)Disable Enable...
Page 12
7.7.5 EAN-13 Additional Code a. EAN-13 Two Digits Additional Code Enable (*)Disable b. EAN-13 Five Digits Additional Code Enable (*)Disable 7.8 CODE 128 7.8.1 Scan the two-dimensional codes below to read/not to read Code 128 (*)Enable Disable 7.8.2 GS1-128 (*)Enable Disable...
Page 13
7.9 Interleaved 2 of 5 7.9.1 Scan the two-dimensional codes below to read/not to read Interleaved 2 of 5. (*)Enable Disable 7.9.2 Only decode Interleaved 2 of 5 of a certain length range. Users can set to decode Interleaved 2 of 5 of a certain length range. For example, to decode Interleaved 2 of 5 of the range of 4 - 20 digits: Scan the barcode below, and then scan “0”, "4", "2", "0"...
Page 14
7.10 Matrix 2 of 5 7.10.1 Scan the two-dimensional codes below to read/not to read Matrix 2 of 5 Enable (*)Disable 7.10.2 Only decode Matrix 2 of 5 of a certain length range Users can set to decode Matrix 2 of 5 of a certain length range. For example, to decode Matrix 2 of 5 of the range of 4 - 20 digits: Scan the barcode below, and then scan “0”, "4", "2", "0"...
Page 15
7.11 Industrial 2 of 5 7.11.1 Scan the two-dimensional codes below to read/not to read Industrial 2 of 5 (*)Disable Enable 7.11.2 Only decode Industrial 2 of 5 of a certain length range Users can set to decode Industrial 2 of 5 of a certain length range. For example, to decode Industrial 2 of 5 of the range of 4 - 20 digits: Scan the barcode below, and then scan “0”, "4", "2", "0"...
Page 16
7.12 Standard 2 of 5 7.12.1 Scan the two-dimensional codes below to read/not to read Standard 2 of 5 (*)Disable Enable 7.12.2 Only decode Standard 2 of 5 of a certain length range Users can set to only decode Standard 2 of 5 of a certain length range. For example, to decode Standard 2 of 5 of the range of 4 - 20 digits: Scan the barcode below, then scan “0”, "4", "2", "0"...
Page 17
7.13 Code 39 7.13.1 Scan the two-dimensional codes below to read/not to read code 39 Disable (*)Enable 7.13.2 Length of Code 39 Decode Code 39 of any length 7.13.3 Verify Code39 Check Digit Verify the Check Digit (*)Do Not Verify the Check Digit 7.13.4 Output Code39 Check Digit To output the Check Digit, please enable to verify the Check Digit firstly.
Page 18
7.13.5 Transmit Start/Stop Characters of Code 39 (*)Disable Enable 7.14 Code 39 Full ASCII 7.14.1 Scan the two-dimensional codes below to read/not to read Code 39 Full ASCII Enable (*)Disable 7.15 Code 32 7.15.1 Scan the two-dimensional codes below to read/not to read Code 32 Enable (*)Disable 7.15.2 Add Prefix “A”...
Page 19
7.15.3 Verify Code32 Check Digit (*)Disable Enable 7.15.4 Output Code 32 Check Digit (*)Output Check Digit Output Start/Stop Characters and Check Digit 7.16 Code 93 7.16.1 Scan the two-dimensional codes below to read/not to read Code 93 (*)Enable Disable 7.16.2 Length of code93 Decode Code 93 of any length...
Page 20
7.16.3 Verify Code93 Check Digit Enable (*)Disable 7.16.4 Output Code93 Check Digit Enable (*)Disable 7.17 Code 11 7.17.1 Scan the two-dimensional codes below to read/not to read Code 11 Enable (*)Disable 7.17.2 Length of code11 Decode Code 11 of any length...
Page 21
7.17.3 Verify Check Digit Enable One Check Digit Two Check Digits 7.17.4 Output Check Digit Enable (*)Disable 7.18 Codabar 7.18.1 Scan the two-dimensional codes below to read/not to read codabar Enable (*)Disable...
Page 22
7.18.2 Length of Codabar Decode Codabar of any length 7.18.3 Format of Start/Stop Characters The start and stop characters can be one of the four characters "A", "B", "C", "D". (*)ABCD/ABCD The start character can be one of the four characters "A", "B", "C", "D", and the stop character can be one of the four characters "T", "N", "*", "E".
Page 23
7.19 MSI 7.19.1 Scan the two-dimensional codes below to read/not to read MSI Enable (*) Disable 7.19.2 Length of MSI Decode MSI of any length 7.20 GS1-Databar 7.20.1 Scan the two-dimensional codes below to read/not to read GS1-Databar Enable (*)Disable 7.21 GS1 composite code 7.21.1 Scan the two-dimensional codes below to read/not to read GS1 composite code...
Page 24
7.22 QR Code 7.22.1 Scan the two-dimensional codes below to read/not to read QR code (*) Enable Disable 7.22.2 QR Twin Code Single QR Only Twin QR Only Both Single and Twin 7.22.3 QR Code Inverse (*)Decode Regular QR Code Only Decode Both Regular and Inverse QR Code...
Page 25
7.22.4 QR Code Mirror Setting (*)Disable Enable 7.23 Data Matrix 7.23.1 Scan the two-dimensional codes below to read/not to read Data Matrix (*)Enable Disable 7.23.2 Data Matrix Twin Code Single Data Matrix Only Twin Data Matrix Only Both Single & Twin...
Page 26
7.23.3 Data Matrix Inverse (*)Decode Regular Data Matrix Only Decode Inverse Data Matrix Only Decode Both 7.23.4 Data Matrix Mirror Setting (*) Disable Enable 7.24 PDF 417 7.24.1 Scan the two-dimensional codes below to read/not to read PDF417 (*) Enable Disable...
Page 27
7.24.2 PDF417 Twin Code Single PDF417 Only Twin PDF417 Only Both Single & Twin 7.24.3 PDF417 Inverse (*)Decode Regular PDF417 Only Decode Inverse PDF417 Only Decode Both...
Page 28
7.25 Aztec code 7.25.1 Scan the two-dimensional codes below to read/not to read Aztec code Enable (*)Disable 7.26 Maxi code 7.26.1 Scan the two-dimensional codes below to read/not to read Maxi code Enable (*)Disable 7.27 Hanxin Code 7.27.1 Scan the two-dimensional codes below to read/not to read Hanxin Code Enable (*)...