Bluetooth Spp Mode - Inateck P7 User Manual

If you are using an Android device, to enble the virtual keyboard, please follow these steps:
1. Open the Settings app on your Android device.
2. Select the language and input method. Operate the following steps according to the version of
Android you are using.
Android 7.0 and above: Select Physical Keyboard → Display Virtual Keyboard.
Android 6.0 and above: Select the current keyboard → hardware (display input method).

2.3 Bluetooth SPP Mode

Bluetooth SPP mode is not the default mode. To enter this mode, please read the barcode "Enter
setup", "Bluetooth SPP Mode" and "Exit with save".
Bluetooth SPP Mode
Exit with save
When switched to Bluetooth SPP mode, the P7 will enter into Bluetooth broadcasting mode and
the blue LED indicator flashes. Then you can search the Bluetooth of P7 and get it paired on your
phone/computer. After successful pairing, you need to run serial debugging tool on your
computer, and select Open Bluetooth COM Port. You will then hear three chord sounds (from
high to low) to indicate the successful Bluetooth connection
Note: There might be two Bluetooth COM ports on the list. If the connection fails, please try the
other COM port.
29
Enter setup