Inateck P7 User Manual page 20

3s
5s
10s
15s
Example of setting the scanner into Continuous Scanning mode and setting the Intermittent time
to 1s:
1. Read the "Enter Setup" barcode;
2. Read the "Continuous Scanning Mode" barcode;
3. Read the "Setup Intermittent time of Continuous scanning " barcode;
4. Read the "1s" barcode;
5. Read the "Exit with Save" barcode.
Note: The factory default value for each setting is indicated by an asterisk "*".
Enter setup
Exit with save
Exit without save
20