Configuring an MFR Bundle Link
Follow these steps to configure an MFR bundle link:
To do...
Enter system view
Enter frame relay interface view
Assign the current interface to an
MFR interface
Configure the MFR bundle link
identifier
Configure the hello message
sending interval for the MFR
bundle link
Configure the waiting time before
the MFR bundle link resends hello
messages
Configure the maximum times that
the MFR bundle link can resend
hello messages
Displaying and Maintaining Multilink Frame Relay
To do...
Display configuration and status of
an MFR interface
Display configuration and statistics
of an MFR bundle and bundle links
Clear statistics of MFR interfaces
Multilink Frame Relay Configuration Examples
MFR Direct Connection Configuration Example
Network requirements
Router A and Router B are directly connected through Serial 2/0/1 and Serial 2/0/2. The frame relay
protocol is used to bundle the two serial ports to provide broader bandwidth.
Use the command...
system-view
interface interface-type
interface-number
link-protocol fr mfr
interface-number
mfr link-name [ name ]
mfr timer hello seconds
mfr timer ack seconds
mfr retry number
Use the command...
display interface mfr [ interface-number |
interface-number.subnumber]
display mfr [ interface interface-type
interface-number | verbose ]
reset counters interface [ mfr
[ interface-number |
interface-number.subnumber ] ]
9-127
Remarks
—
—
Required
An interface is not assigned to any
MFR interface by default.
Optional
The name of the current interface
is used by default.
Optional
10 seconds by default
Optional
4 seconds by default
Optional
2 by default
Remarks
Available in any view
Available in any view
Available in user view