H3C SR6600 Configuration Manual page 44

For more information about local user and domain configuration, see AAA in the Security Configuration
Guide.
2) Configuring the authenticatee
Follow these steps to configure the authenticatee:
To do...
Enter system view
Enter interface view
Assign a username to the CHAP
authenticatee
Create a local user
account for the
authenticator and
set the password
Configuring CHAP authentication when no authenticator name is configured
1) Configuring the authenticator
Follow these steps to configure the authenticator:
To do...
Enter system view
Enter interface view
Configure the local router to
authenticate the peer using
CHAP
Quit to system view
Create a local user account for
the authenticatee and enter
local user view
Configure the password for the
local user
Configure the service type of
the local user as PPP
Quit to system view
Create an ISP domain, or enter
an existing ISP domain view
system-view
interface interface-type
interface-number
ppp chap user username
Quit to system view
quit
Create a local user
account and enter
local-user username
local user view
password { cipher | simple }
Set the password
password
Use the command...
Use the command...
system-view
interface interface-type
interface-number
ppp authentication-mode
chap [ [ call-in ] domain
isp-name ]
quit
local-user username
{
password cipher
simple } password
service-type ppp
quit
domain isp-name
2-34
Remarks
—
—
Required
The username you assign to
the authenticatee here must
be the same as the local
username you assign to the
authenticatee on the
authenticator.
—
Required
Required
Remarks
—
—
Required
By default,
authentication is not
performed.
—
Required
|
Required
Required
—
Optional
PPP