Mfr Switched Connection Configuration Example - H3C SR6600 Configuration Manual

Figure 9-2 Network diagram of MFR direct connection
Configuration procedure
1) Configuration on Router A
# Create and configure MFR interface 4 (MFR4)
<RouterA> system-view
[RouterA] interface mfr 4
[Router`A-MFR4] ip address 10.140.10.1 255.255.255.0
[RouterA-MFR4] fr interface-type dte
[RouterA-MFR4] fr map ip 10.140.10.2 100
[RouterA-MFR4] quit
# Bundle Serial 2/0/1 and Serial 2/0/2 to MFR4.
[RouterA] interface serial 2/0/1
[RouterA-Serial2/0/1] link-protocol fr mfr 4
[RouterA-Serial2/0/1] quit
[RouterA] interface serial 2/0/2
[RouterA-Serial2/0/2] link-protocol fr mfr 4
2) Configuration on Router B
# Create and configure MFR interface 4 (MFR4).
<RouterB> system-view
[RouterB] interface mfr 4
[RouterB-MFR4] ip address 10.140.10.2 255.255.255.0
[RouterB-MFR4] fr interface-type dce
[RouterB-MFR4] fr dlci 100
[RouterB-fr-dlci-MFR4-100] quit
[RouterB-MFR4] fr map ip 10.140.10.1 100
[RouterB-MFR4] quit
# Bundle Serial 2/0/1 and Serial 2/0/2 to MFR4.
[RouterB] interface serial 2/01
[RouterB-Serial2/0/1] link-protocol fr mfr 4
[RouterB-Serial2/0/1] quit
[RouterB] interface serial 2/0/2
[RouterB-Serial2/0/2] link-protocol fr mfr 4

MFR Switched Connection Configuration Example

Network requirements
Router A and Router C are connected through MFR to Router B where MFR switching is enabled.
9-128