H3C SR6600 Configuration Manual page 120

Layer 2 – wan configuration
Hide thumbs Also See for SR6600:
Table of Contents

Advertisement

Line protocol current state: UP
Description: Hdlc-bundle1 Interface
The Maximum Transmit Unit is 1500
Internet Address is 1.1.1.1/24 Primary
Link layer protocol is HDLC
Physical is HDLC-BUNDLE, baudrate: 155520 kbps
Output queue : (Urgent queuing : Size/Length/Discards)
Output queue : (Protocol queuing : Size/Length/Discards)
Output queue : (FIFO queuing : Size/Length/Discards)
Last clearing of counters:
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
Verify that the HDLC link bundle interfaces on Router A and Router B can ping each other.
[RouterA] ping –a 1.1.1.1 1.1.1.2
PING 1.1.1.2: 56
Reply from 1.1.1.2: bytes=56 Sequence=1 ttl=255 time=1 ms
Reply from 1.1.1.2: bytes=56 Sequence=2 ttl=255 time=1 ms
Reply from 1.1.1.2: bytes=56 Sequence=3 ttl=255 time=1 ms
Reply from 1.1.1.2: bytes=56 Sequence=4 ttl=255 time=1 ms
Reply from 1.1.1.2: bytes=56 Sequence=5 ttl=255 time=1 ms
--- 1.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/1 ms
Never
data bytes, press CTRL_C to break
7-110
0/100/0
0/500/0
0/75/0

Advertisement

Table of Contents
loading

Table of Contents