Datalogic AMT58-PB Series Instruction Manual page 8

AMT58x-PB Profibus®
 Install the device following strictly the information in the section "3
- Mounting instructions";
 mechanical installation has to be carried out with stationary
mechanical parts;
 do not disassemble the encoder;
 do not tool the encoder or its shaft;
 delicate electronic equipment: handle with care; do not subject the
device and the shaft to knocks or shocks;
 respect
the
manufacturer;

unit with solid shaft: in order to guarantee the maximum
reliability over time of the mechanical parts, we recommend a
flexible coupling to be installed to connect the encoder and the
installation shaft; make sure the misalignment tolerances of the
flexible coupling are respected;

unit with hollow shaft: the encoder can be mounted directly on a
shaft whose diameter has to respect the technical characteristics
specified in the purchase order and clamped by means of the
collar and the fixing plate into which an anti-rotation pin has to be
inserted.
2
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Mechanical safety
environmental characteristics declared by