Datalogic AMT58-PB Series Instruction Manual page 71

AMT58x-PB Profibus®
5.2 Reading diagnostic information
The diagnostic information message can be set either to 16 or 63
bytes, see Diagnostic type
Before entering the diagnostic page, it is necessary to
connect to the unit (enter online status). To do this, select
Station\Open online in the HW Config window or click the
Online<->Offline button (see icon on the left). Then select
PLC\Module information... to enter the Module information window.
Finally open the DP Slave Diagnostic page.
Click the Hex. Format... button to display diagnostic information:
16
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
in encoder parameters.