Datalogic AMT58-PB Series Instruction Manual page 70

Properties – DP slave window will appear; in the Parameter
Assignment page the list of all encoder parameters is available.
For any information on using and setting each parameter refer to
section "6.4 DDLM_Set_Prm".
After having set new parameter values, click the OK button to
close the Properties – DP slave window and then the
Download button (see icon on the left) in the toolbar of the
HW Config window to download set parameters.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Class 2 example
Class 2(+VEL) example
AMT58x-PB Profibus®
15