Wheel Index Adjustment; Re-Write Ld Hours Usage; Video Performance; Cvbs - Christie Captiva DHD400S Service Manual

3. "OK" will be shown on the screen.
4. Select VGA-2 ADC Calibration > Enter.
5. "OK" will be shown on the screen.

Wheel Index Adjustment

Test Pattern
Inspection Item
1. Place the projector on a clean horizontal surface.
2. Enter Factory Mode, see
3. Select Wheel Index.
4. Check if each color level is well performed.
5. If not, adjust P-Wheel Index and F-Wheel Index by pressing "right" and "left" button.

Re-write LD Hours Usage

1. Enter Factory Mode, see
2. Select "LD Fail" then press "Enter" key.
3. Select "LD Hour-Full", then use "left" and "right" key to re-write "LD Hour-Full".
4. Select "LD Hour-ECO", then use "left" and "right" key to re-write "LD Hour-ECO".
5. Select "LD Hour-Bright", then use "left" and "right" key to re-write "LD Hour-Bright".
6. Select "Operating Hour", then use "left" and "right" key to re-write "Operating Hour".
7. Press "Menu" key to exit.

Video Performance

CVBS

Test equipment
Test signal
Inspection Item
Inspection Distance
Criteria
Captiva Service Manual
020-000867-03 Rev. 1 (05-2018)
64WRGB, full color patten
64 WRGB & full color pattern should all appear normal.
Factory Mode
Factory Mode
DVD player
CVBS
Video performance test.
1.8 to 2.2 m
Check any abnormal color, line distortion or any noise on the screen.
on page 4.
on page 4.
Service Setup
8