Function Inspection; Check Points For Exterior And Print Pattern - Christie Captiva DHD400S Service Manual

Service Setup
Note: If the "auto Calibration still failed" message appears on screen, please change to manual calibra-
tion mode.

Function Inspection

General
Factory Default
Display Size
Display Data
Channel
Acoustic

Check points for exterior and print pattern

Check item
Text and Pattern
Exterior
Focus and Zoom
Logo
Screw
Pedestal
Lamp Cover
Plastic Parts
Safety or warning
label
Connector
13
All OSD functions must be checked for functionality. When OSD menu is displayed, there
shall be no visible peaking, ringing, streaking, or smearing artifacts on the screen.
The factory settings (with appropriate centering, size, geometry distortion, etc.) shall be
displayed upon "Factory Reset" is selected from OSD.
All preset modes shall expand to full screen size using OSD Horizontal and Vertical Size
controls.
The purpose of the DDC test is to verify the (DDC), DDC1/DDC2B operation of the
projector and to verify Plug & Play function.
High pitch sound from cooling fan and color wheel is unacceptable.
Missing letters and pattern or blurry prints are unacceptable.
Dirt, scrape, water ripples and uneven color are unacceptable.
Focus and Zoom functioning well.
Missing logo, missing prints and blurry prints are unacceptable
All screws should be fixed and in right type.
Functioning well
It should be locked in the correct place.
All plastic parts can not be broken and damaged.
All safety and warning labels should be visible, including all contents.
All interface connectors should be complete and workable.
Check Point
Captiva Service Manual
020-000867-03 Rev. 1 (05-2018)