Ir Camera Test; Projector Setting; Setup Touchdriver Procedure; Ir Camera Calibration - Christie Captiva DHD400S Service Manual

IR Camera Test

Projector Setting

1. Power on projector.
2. Connect the PC and Projector by mini USB Cable.
3. Connect the PC and Projector by VGA Cable.

Setup TouchDriver Procedure

Please download "LCTv.1.6.3.exe" first.
1. Double click "LCTv.1.6.3.exe" to install the application.
2. After install the application, a USB driver need to install, click "Install from a list or specific
location (Advanced)".
3. Click "Don't search. I will choose the driver to install".
4. Click "Next".
5. Click "Finish".

IR camera calibration

• For IR camera test need the special pen:75.73901G001
• If use the XP system, install"Microsoft.NET" first
1. Click "LCT".
2. Click "Operation Mode", then select "Pen Mode".
3. Click "Calibration", then select "Auto".
4. Click "Start".
5. Click "OK".
6. Please touch the target marks on the screen. (If you would like exit calibration process, please
use the "ESC" key) After the 9th point of calibration is finished, please wait for 2 seconds while
calibration data is saved, then touch is ready for use.
Captiva Service Manual
020-000867-03 Rev. 1 (05-2018)
Service Setup
12