Selecting Data Formats (Bits 12 Through 14); Raw/Proportional Data - Spectrum Controls 1769 Series User Manual

Input
Type
J
K
T
E
R
S
B
N
C
L
±50 mV
±100 mV
NOTE
4 Type B and C thermocouples cannot be represented in engineering units x 1 (°F) above 3276.7°F. Software treats
it as an over range error.
5 When millivolts are selected, the temperature setting is ignored. Analog input data is the same for either °C or °F
selection.
Chapter 3: Module, Data, Status, and Channel Configuration

3.2.4 Selecting Data Formats (Bits 12 through 14)

This selection configures channels 0 through 5 to present analog data in any of
the following formats:
•

Raw/Proportional Data

• Engineering Units ×1
• Engineering Units ×10
• Scaled for PID
• Percent Range
Table 3-3 (Channel Data Word Format)
Data Format
Engineering Units ×10
˚ Celsius ˚ Fahrenheit
-210 to 1200 -346 to 2192
-270 to 1370 -454 to 2498
-270 to 400 -454 to 752
-270 to 1000 -454 to 1832
0 to 1768 32 to 3214
0 to 1768 32 to 3214
300 to 1820 572 to 3308
-210 to 1300 -346 to 2372
0 to 2315 32 to 4199
-200 to 900 -328 to 1652
-500 to 500 2 -500 to 500
-1000 to -1000 to
1000 2 1000 2
The engineering unit data formats represent real engineering temperature
units provided by the module to the controller. The raw/proportional
counts, scaled-for-PID and percent of full-scale data formats may yield the
highest effective resolutions, but may also require that you convert
channel data to real engineering units in your control program
Engineering Units ×1
˚ Celsius ˚ Fahrenheit
-2100 to 12000 -3460 to 21920
-2700 to 13700 -4540 to 24980
-2700 to 4000 -4540 to 7520
-2700 to 10000 -4540 to 18320
0 to 17680 320 to 32144
0 to 17680 320 to 32144
3000 to 18200 5720 to 32767
-2100 to 13000 -3460 to 23720
0 to 23150 320 to 327674
-2000 to 9000 -3280 to 16520
2 -5000 to 5000 2 -5000 to 5000
-10000 to -10000 to
10000 2 100005
User's Manual Pub. 0300244-02 Rev. A
Scaled Proportional
For Counts
PID
0 to -32767 to
16383 32767
0 to -32767 to
16383 32767
0 to -32767 to
16383 32767
0 to -32767 to
16383 32767
0 to -32767 to
16383 32767
0 to -32767 to
16383 32767
4 0 to -32767 to
16383 32767
0 to -32767 to
16383 32767
0 to -32767 to
16383 32767
0 to -32767 to
16383 32727
5 0 to -32767 to
16383 32767
0 to -32767 to
16383 32767
3-5