Table of Contents
Advertisement
Operation
8.4
Messages
Any errors on the safety card are indicated on the servo amplifier display with message
"F31".
The following options are available for detailed diagnostics and fault detection:
}
LEDs on the front of the safety card provide information on operating states (see sec-
tion on "Display elements" in this chapter).
}
Outputs on the safety card display the state of the safety functions (e.g. STO Acknow-
ledge).
}
Errors and messages are entered in the safety card's error stack.
}
The following are displayed in online mode in the Configurator PASconfig SDrive:
–
–
}
The expanded diagnostics system PVIS displays errors, messages and the correspond-
ing remedies only in conjunction with a PMCprimo controller.
Operating Manual PMCprotego S2-2(-C)
1002529-EN-04
Safety card status messages and error messages (error stack)
States of safety card inputs and outputs
71
Advertisement
Table of Contents
