Table of Contents
Advertisement
Installation
5.3
Installing the safety card
The expansion card is installed in slot 3 of the servo amplifier. When installing, please note
the guidelines given under "Installation" in the operating manual for the servo amplifier.
1.Remove the film.
4. Using suitable pliers, pull out the blank in the safety card
plug
Operating Manual PMCprotego S2-2(-C)
1002529-EN-04
2. Break the middle link
3. Break the top link and
lever out the cover plate
5. Plug in the safety card
and tighten the screws
48
Advertisement
Table of Contents
