Table of Contents
Advertisement
Commissioning
7.3.3.2
Download configuration to SD card
2
5
figuration data must first be saved to the SD card.
There are two options for downloading a configuration to an SD card:
1. option
Prerequisite:
a Connection to an external SD card read device
Procedure:
–
–
2. option
amplifier.
Prerequisite
–
–
Procedure:
–
–
7.3.3.3
Download configuration from SD card to safety card
Before carrying out the steps described in this section, please note the following safety
guidelines:
Operating Manual PMCprotego S2-2(-C)
1002529-EN-04
You can download the configuration data to the safety card via an SD card. The con-
2
: Downloading a configuration via an SD card, which is written by the PC.
Select Project -> Save to SD Card in the safety card's Configurator.
Remove the SD card from the external SD card read device and insert it into the
servo amplifier's SD card read device
configuration from SD card to safety card").
5
: Downloading a configuration via an SD card, which is written by the servo
Connection is established between the PC and servo amplifier (RS 232 or Ether-
net).
An SD card must be inserted in the servo amplifier.
Select Online Mode -> Servo Amplifier Configuration -> SD Card in the safety card's
Configurator.
Remove the SD card from the servo amplifier and insert it into the SD card read
device of the servo amplifier that you wish to configure
under "Download configuration from SD card to safety card").
INFORMATION
Further information is available in the safety card Configurator's online help.
3
(continue as described under "Download
6
(continue as described
64
Advertisement
Table of Contents
