Standards - Pilz PMCprotego S2-2 Operating Manual

Safety
3.2

Standards

Knowledge of and compliance with the relevant standards and directives are a prerequisite
for using the safety card. The following standards are relevant:
}
EN 61326-3-1: Electrical equipment for measurement, control and laboratory use -
EMC requirements
}
EN 61800-3: Adjustable speed electrical drives
}
EN 61800-5-2: Adjustable speed electrical power drive systems – Part 5-2: Safety re-
quirements. Functional
}
EN ISO 13849-1: Safety of machinery – Safety-related parts of control systems –
Part 1: General principles for design, Part 2: Safety validation
}
EN 61508: Functional safety of safety-related electrical/electronic/programmable elec-
tronic control systems, Parts 1, 3, 4
}
EN 61508-2: Requirements for safety-related electrical/electronic/programmable elec-
tronic systems
}
EN 60204-1: Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
}
EN 62061: Safety of machinery – Functional safety of safety-related electrical, elec-
tronic and programmable electronic control systems
Please note this is not an exhaustive list of safety standards and directives.
Where standards are undated, the 2009-03 latest editions shall apply.
Operating Manual PMCprotego S2-2(-C)
1002529-EN-04
12