Function description
4.6
Configuration
The safety functions to be carried out by the safety card are defined in the safety card's
configurator:
}
Configuration of the safety functions
}
Setting of limit values, braking ramps for the safety functions, monitoring of motion se-
quences
Download configuration:
}
On single-axis systems, via the RS232 interface on the servo amplifier
}
On networked systems, via the RS232 or Ethernet interface on the motion control sys-
tem. The control system passes the configuration to the respective safety card.
Download of the configuration to the safety card:
}
Online from configurator to safety card.
}
Save configuration to external SD card.
}
Order and serial numbers must be entered in the configuration to ensure the safety
card is addressed securely.
}
The feasibility of the configuration is checked when it is downloaded.
}
Enabling of the power element after download depends on the status of the inputs on
the safety card.
Upload configuration from safety card:
}
Online from safety card to configurator
}
Save safety card configuration to SD card in the servo amplifier.
}
The feasibility of the configuration is checked as it is uploaded.
Operating Manual PMCprotego S2-2(-C)
1002529-EN-04
INFORMATION
Further information on the configuration and parameter settings for the
safety functions is available in the safety card configurator's online help.
46