Download Print this page

Rra; Rohs; Other Approvals - Siemens RUGGEDCOM RSG910C Installation Manual

Simatic net rugged ethernet switches
Hide thumbs

Advertisement

6.1.8

RRA

This device has been registered by the Korean Radio Research Agency (RRA) under
Clause 3, Article 58-2 of the Radio Waves Act. As such, the device is marked with a KC
symbol and can be used in the Republic of Korea (South Korea) as a Class A product
in a commercial, industrial or business environment.
A copy of the KC Declaration of Conformity is available from Siemens AG. For contact
information, refer to
Notices specific to the RRA:
Class A Equipment (Industrial Broadcasting and Communication Equipment)
This device complies with the limits of a Class A electromagnetic wave device and
is intended for use outside of a residential environment. The seller or user must be
aware.
A급 기기 (업무용 방송통신기자재)
이 기기는 업무용(A급) 전자파적합기기로서 판매자 또는 사용자는 이 점을 주의하시
기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.
6.1.9

RoHS

This device is declared by Siemens AG to meet the requirements of the following Ro-
HS (Restriction of Hazardous Substances) directives for the restricted use of certain
hazardous substances in electrical and electronic equipment:
A copy of the Material Declaration is available online at
try.siemens.com/cs/ww/en/view/109738831.
6.1.10

Other Approvals

This device meets the requirements of the following additional standards:
RUGGEDCOM RSG910C
Installation Manual, 02/2020, C79000-G8976-1405-06
R-REM-S14-RSG910C
"Contacting Siemens (Page
WARNING
경고
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic Informa-
tion Products
IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
vii)".
https://support.indus-
Certification
6.1.8 RRA
35

Advertisement

loading

  Also See for Siemens RUGGEDCOM RSG910C

This manual is also suitable for:

Simatic net ruggedcom rsg907rRuggedcom rsg909r