Standard
1588-2008
62439-2:2016
62439-3:2016
5.4
Copper Ethernet Port Specifications
The following details the specifications for copper Ethernet ports that can be ordered
with the RUGGEDCOM RSG910C.
Speed
Connector
Duplex
Cable Type
Wiring Standard
Maximum Distance
Isolation
a
Auto-negotiating.
b
Shielded.
c
Auto-crossover and auto-polarity.
d
Typical distance. Dependent on the number of connectors and splices.
e
RMS 1 minute.
5.5
Operating Environment
The RUGGEDCOM RSG910C is rated to operate under the following environmental
conditions.
Ambient Operating Tempera-
ture
Ambient Storage Temperature
Ambient Relative Humidity
Maximum Altitude
a
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
b
Operating temperature may vary based on the limitations of installed SFPs. Refer to the RUGGEDCOM
SFP Transceivers Catalog for SFP temperature ratings.
c
Non-condensing.
RUGGEDCOM RSG910C
Installation Manual, 02/2020, C79000-G8976-1405-06
10 Mbps Ports
IEEE
ü
IEC
IEC
ü
a
10/100/1000Base-TX
RJ45
a
FDX/HDX
b
> CAT 5
c
TIA/EIA T568A/B
d
100 m (328 ft)
e
1.5 kV
a b
c
5.4 Copper Ethernet Port Specifications
100 Mbps
1000 Mbps
Ports
Ports
ü
ü
ü
ü
ü
ü
-40 to 85 °C (-40 to 185 °F)
-40 to 85 °C (-40 to 185 °F)
5% to 95%
2000 m (6562 ft)
Technical Specifications
Description
Precision Time Protocol (PTP)
Version 2
Media Redundancy Protocol
(MRP)
High-Availability Seamless Re-
dundancy (HSR), Parallel Redun-
dancy Protocol (PRP)
27