6.1.6 Iso; Tüv Süd; Rra - Siemens SIMATIC NET RUGGEDCOM RST916P Installation Manual

Rugged ethernet switches
Hide thumbs Also See for SIMATIC NET RUGGEDCOM RST916P:
Table of Contents

Advertisement

Certification
6.1.6 ISO
6.1.6
ISO
This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
6.1.7
TÜV SÜD
This device is certified by TÜV SÜD to meet the requirements of the following
standards:
6.1.8

RRA

This device has been registered by the Korean Radio Research Agency (RRA) under
Clause 3, Article 58-2 of the Radio Waves Act. As such, the device is marked with a KC
symbol and can be used in the Republic of Korea (South Korea) as a Class A product
in a commercial, industrial or business environment.
A copy of the KC Declaration of Conformity is available from Siemens AG. For contact
information, refer to
Notices specific to the RRA:
Class A Equipment (Industrial Broadcasting and Communication Equipment)
This device complies with the limits of a Class A electromagnetic wave device and
is intended for use outside of a residential environment. The seller or user must be
aware.
36
ISO 9001:2015
Quality management systems – Requirements
CAN/CSA-C22.2 NO. 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-
National standard, with UL 62368-1)
UL 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements
R-R-S14-RST916P
"Contacting Siemens (Page
WARNING
vii)".
Installation Manual, 04/2021, C79000-G8976-1489-01
RUGGEDCOM RST916P

Advertisement

Table of Contents
loading

Table of Contents