Tüv Süd; Rra; Iso - Siemens SIMATIC NET RUGGEDCOM RSG909R Installation Manual

6.1.6 TÜV SÜD
This device is certified by TÜV SÜD to meet the requirements of the following
standards:
•
•
The device is marked with a TÜV SÜD symbol that indicates compliance with both
Canadian and U.S. requirements.
6.1.7

RRA

This device has been registered by the Korean Radio Research Agency (RRA) under
Clause 3, Article 58-2 of the Radio Waves Act. As such, the device is marked with a KC
symbol and can be used in the Republic of Korea (South Korea) as a Class A product
in a commercial, industrial or business environment.
A copy of the KC Declaration of Conformity is available from Siemens Canada Ltd..
For contact information, refer to "Contacting Siemens" (Page vii).
Notices specific to the RRA:
Class A Equipment (Industrial Broadcasting and Communication Equipment)
This device complies with the limits of a Class A electromagnetic wave device and
is intended for use outside of a residential environment. The seller or user must be
aware.
6.1.8

ISO

This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
RUGGEDCOM RSG909R
Installation Manual, 04/2023, C79000-G8976-1388-17
CAN/CSA-C22.2 NO. 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-
National standard, with UL 62368-1)
IEC/EN/UL 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements
R-REM-S14-RSG909R
WARNING
Certification
6.1.6 TÜV SÜD
37