Supported Networking Standards; Copper Ethernet Port Specifications; Fiber Optic Ethernet Port Specifications - Siemens SIMATIC NET RUGGEDCOM RS900 Equipment Manual

Technical Specifications
5.4 Supported Networking Standards
5.4

Supported Networking Standards

The following networking standards are supported by RUGGEDCOM RS900:
Standard
IEEE 802.3x
IEEE 802.3z
IEEE 802.3ab
IEEE 802.1D
IEEE 802.1Q
IEEE 802.1p
5.5

Copper Ethernet Port Specifications

The following details the specifications for copper Ethernet ports that can be ordered
with the RUGGEDCOM RS900.
Speed
Connector
Duplex
Cable Type
Wiring Standard
Maximum Distance
Isolation
a
Auto-negotiating.
b
Shielded or unshielded.
c
Auto-crossover and auto-polarity.
d
Typical distance. Dependent on the number of connectors and splices.
e
RMS 1 minute.
5.6

Fiber Optic Ethernet Port Specifications

The following details the specifications for fiber Ethernet ports that can be ordered
with the RUGGEDCOM RS900.
Note
•
•
26
10 Mbps
Ports
•
•
•
•
a
10/100Base-TX
RJ45
a
FDX/HDX
b
> CAT 5
c
TIA/EIA T568A/B
d
100 m (328 ft)
e
2.5 kV
All optical power numbers are listed as dBm averages. To convert from average
to peak, add 3 dBm. To convert from peak to average, subtract 3 dBm.
Maximum segment length is greatly dependent on factors such as fiber quality,
and the number of patches and splices. Consult a Siemens sales associate when
determining maximum segment distances.
100 Mbps 1000 Mbps Ports
Ports
• •
•
•
• •
• •
• •
Notes
Full Duplex Operation
1000Base-LX
1000Base-Tx
MAC Bridges
VLAN (Virtual LAN)
Priority Levels
RUGGEDCOM RS900
Equipment Manual, 11/2023, C79000-G8976-1024-16