Table of Contents
Advertisement
Safety instructions
2.2 Transport
Handle the machine with care during unloading and transport; there is a risk of it
tipping over. Never lift or move the machine without using the wooden packaging
to support the stand.
2.3 Installation
•
•
•
In order to further increase safety, we recommend that the installation is equipped
with a circuit breaker and that the machine is placed on a water absorbent mat
(WD009.9100).
2.4 Detergent and drying agent
Be aware of the risks involved in handling detergents and drying agents. Protec-
tive gloves and safety glasses should be used when handling, and an eyebath
should be within easy access. Read the warning text on the detergent and drying
agent containers as well as the detergent supplier's instructions.
2.5 Operation
•
•
•
2.5.1 High temperatures
•
•
2.5.2 Risk of crushing
Take care when the door is closed to avoid crushing injuries.
WD-4S
The machine is designed for quick electrical installation.
The machine must be connected to a lockable main switch.
Make sure that the mains voltage is the same as that indicated on the ma-
chine's rating plate.
If the machine will not be used for a longer period, the power to the machine
should be turned off using the power switch, the water supply turned off and
the door should be left ajar.
There is a slight risk of the machine tipping if the items are not stacked
properly.
Avoid contact with the back of the machine as it becomes hot during oper-
ation.
The temperature of the washing and rinsing water is 60° C and 85°C. Do
not open the machine until the rinsing phase has finished. The steam that
comes out of the machine after the wash has been completed is hot.
Avoid touching hot pipes and booster heaters. The machine's outer jacket
can also become hot during operation.
6
Rev. 5.0 (201912)
Hide quick links:
Advertisement
Table of Contents
