Unify OpenStage Developer's Manual page 243

Nur für den internen Gebrauch
Item name
device-type
gigabit-
ethernet-
enabled
related-
software-type
software-type
part-number
slk-modules
blf-modules
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer's Guide
Type Values
Text.
OpenStage 15;
Max. 50
OpenStage 20E;
characters
OpenStage 20;
OpenStage 40;
OpenStage 60;
OpenStage 80
Boolean
true/false
Text. Siemens SIP [SIP] Sent to the priovisioning service to
Max. 30
characters
Text.
Siemens SIP
Max. 30 [SIP];
characters
Siemens HFA
[HFA]
Text.
Max. 25
characters
Integer For OpenStage 20E
and OpenStage 20,
the value is always
0.
For OpenStage 15,
the value may be 0
or 1.
For OpenStage 40
to 80, the value may
be 0, 1 or 2.
Integer For OpenStage SIP
phones, the value is
always 0.
Phone Parameters - Provisioning
Phone Specific, Hardware Related
Description
Sent to the provisioning service to
identify phone variant. Value is read
only. Displayed in the web page ban-
ner. The value is built up during
phone start up, querying hardware
variant.
OpenScape DPIP35 = OpenStage
20, OpenScape DPIP55 G = Open-
Stage 60
Relevant for OpenStage 20/40/60/
80 G / DPIP55G only. Indicates
whether the phone's network inter-
face is switched to 1Gb/s speed. Val-
ue is read only.
identify phone software type. Value
is read only.
Sent to the priovisioning service to
identify phone software type. Value
is read only.
Sent to the priovisioning service to
communicate the phone's part num-
ber. Value is read only.
Number of OpenStage Key
Modules. Sent to the provisioning
service in "ReadAllItems" message
response. Value is read only.
Number of BLF Modules. Sent to the
provisioning service in
"ReadAllItems" message response.
Value is read only.
c06.fm
243