Table of Contents
Advertisement
Nur für den internen Gebrauch
3.9
Tracing and Debugging
Besides the error handling capabilities described above, the phone provides detailed tracing
information about the communication between phone and provisioning service. To enable this
functionality via the WBM, proceed as follows:
•
Open the WBM in your browser, log in to the "Administrator Pages", and navigate to
"Diagnostics" > "Fault trace configuration".
•
Under "Trace levels for components", set the trace level for "DLS client management", e.g.
"DEBUG", and set all other trace levels to "OFF".
•
Confirm the changes by clicking "Submit".
•
When the processes to be traced are finished, you can view the tracing data by clicking on
the link "Download trace file" under "Diagnostics" > "Fault trace configuration".
The tracing facility can also be configured and controlled by the provisioning service; see Sec-
tion 4.13.3, "Fault trace configuration".
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer's Guide
Basic Communication Procedures
Tracing and Debugging
c03.fm
85
Advertisement
Table of Contents
