Nur für den internen Gebrauch
Item name
radius-server-
ca1
radius-server-
ca2
send-url-
server-ca
<index=0>
send-url-
server-ca
<index=1>
send-url-
server-ca
<index=2>
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer's Guide
Type
Values
PEM file
Note: If the XML
(single cer-
item received from
tificate or
the provisioning ser-
certificate
vice is empty, this
chain
means delete the
corresponding cer-
tificate at the phone.
PEM file
Note: If the XML
(single cer-
item received from
tificate or
the provisioning ser-
certificate
vice is empty, this
chain
means delete the
corresponding cer-
tificate at the phone.
PEM file
Note: If the XML
(single cer-
item received from
tificate or
the provisioning ser-
certificate
vice is empty, this
chain
means delete the
corresponding cer-
tificate at the phone.
PEM file
Note: If the XML
(single cer-
item received from
tificate or
the provisioning ser-
certificate
vice is empty, this
chain
means delete the
corresponding cer-
tificate at the phone.
PEM file
Note: If the XML
(single cer-
item received from
tificate or
the provisioning ser-
certificate
vice is empty, this
chain
means delete the
corresponding cer-
tificate at the phone.
Phone Parameters - Provisioning
Description
Current RADIUS server CA certifi-
cate. For 802.1x network access
(using EAP-TLS, PEAP or EAP-
TTLS). To allow phone to verify cer-
tificate received from RADIUS serv-
er. Stored as encrypted within DAS
only. Certificate Management knows
the decryption key.
Next RADIUS server CA certificate,
to support transition in case the cer-
tificate on the RADIUS server should
change to a certificate signed by a
new CA.
First certificate to enable a secure
connection with the web server
specified for the "send URL" function
(see Section 4.4.5.3, "Send URL").
Available with firmware version V2.
Second certificate to enable a se-
cure connection with the web server
specified for the "send URL" function
(see Section 4.4.5.3, "Send URL").
Available with firmware version V2.
Third certificate to enable a secure
connection with the web server
specified for the "send URL" function
(see Section 4.4.5.3, "Send URL").
Available with firmware version V2.
c06.fm
Certificates
251
Need help?
Do you have a question about the OpenStage and is the answer not in the manual?