Table of Contents
Advertisement
Nur für den internen Gebrauch
WBM Name
Auto hide time
(sec.)
5.3.5
Keyset
5.3.5.1
Lines
The following parameters can be configured individually for each line handled by the phone. As
they are already described in the administrator chapter, only cross-references to the corre-
sponding section are given here.
WBM Name
Ring delay (seconds)
Allow in overview
Address
Primary line
(read only)
Ring on/off
(read only)
Ringer file
Ringer/Pattern melody
Ringer/Pattern sequence Section 4.11.1, "Distinctive Ringers per Keyset Lines"
Selection order
Hot/warm line
Hot/warm destination
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer's Guide
Item name
Type
Enumer-
context-
ation
menu-auto-
hide-time
See
Section 4.4.5.3, "Line"
Section 4.4.5.3, "Line"
Section 4.4.5.3, "Line"
Section 4.4.5.3, "Line"
Section 4.4.5.3, "Line"
Section 4.11.1, "Distinctive Ringers per Keyset Lines"
Section 4.11.1, "Distinctive Ringers per Keyset Lines"
Section 4.4.5.3, "Line"
Section 4.4.5.3, "Line" (Hot warm action)
As the hotline/warmline function is used in special scenarios only,
it is generally recommended not to use this option in MAA environ-
ments.
Phone Parameters - User
Values
Description
Timeout in seconds after
5=5;
which the automatically
10=10;
opened context menu will
20=20;
disappear.
30=30;
Relevant for OpenStage
60=60;
40/60/80/41 and Open-
120=120;
Scape DPIP 55G.
No auto
Available with firmware
hide=0(context
menu will stay
version V2R1.
open)
Default: 20,
OS40 US: 0
c05.fm
Configuration
233
Advertisement
Table of Contents
