Unify OpenStage Developer's Manual page 162

c04.fm
Phone Parameters - Administration
System
WBM Name
Preselect mode
Preselect timer
Preview mode
162
Item name
line-button-
mode
line-
preselection-
timer
preview-mode-
locked
Type Values
Enumer- 0=single but-
ation ton
1=preselection
Default: 0
Integer 0 to 60
Boolean
true/false
Nur für den internen Gebrauch
Description
Determines the phone's
behaviour when a call is
active, and another call is
ringing.
If set to "single button",
the user can accept the
call a single press on the
line key.
If set to "preselection",
the user must first press
the line key to select it
and then press it a sec-
ond time to accept the
call.
Relevant if line-
button-mode is set to 1.
The parameter sets the
timeout in seconds for the
second key press that is
required to accept the
call. After the timeout has
expired, the call is no
longer available.
Relevant for OpenScape
Voice only.
When set to false, pre-
view mode will end when
the user uses the pre-
viewed line, or a new call
is started in any other
way, or if the focus is
changed away from call
view. When set to true,
preview mode remains
active until the user can-
cels it by pressing the key
again.
A31003-S2000-R102-16-7620 02/2016
Provisioning Service, Developer's Guide