Configuration Data - Unify OpenStage Developer's Manual

c03.fm
Basic Communication Procedures

Configuration Data

3.2 Configuration Data
Configuration and control data is communicated in data items which act as containers for the
parameters proper. Most of the simpler items are defined by the name attribute and the content
of the element.
The attributes name and index are used in messages sent by the phone, and in messages
sent by the provisioning service. The status attribute only exists in responses from the phone.
The item element can have the following attributes:
Attribute Value
Enumerated: Tag
name
(mandatory) name
Number
index
(optional)
String
type
(optional)
status failed
(optional)
unknown item
read only
invalid index
unexpected item
not supported
invalid data
undefined status Some other problem has occurred.
26
Description
Identifier for the item. However, more than one item
element may appear within one message (See in-
dex underneath).
Enables multiple instances of one item. It represents
the sequential number of a particular instance of an
item.
An arbitrary value may be associated with the item.
Currently, this attribute is not used.
The phone did not accept the value of this item.
An item with this name is not known.
The value of the item cannot be modified.
The index of this item is out of the range or does not
make sense in this context.
This item was not expected by the phone, or within
this context.
This item is not implemented yet in the phone.
The phone does not accept the value of this item.
Nur für den internen Gebrauch
A31003-S2000-R102-16-7620 02/2016
Provisioning Service, Developer's Guide