Table of Contents
Advertisement
Nur für den internen Gebrauch
4.14
Maintenance
4.14.1
Remote trace
This area is applicable only when using the web interface.
WBM Name
Remote Trace
Status
User Notification remote-
Remote Server
IP
Remote Server
Port
4.14.2
Restart Phone
The regular phone restart, which retains the phone's settings, is triggered by a special Action,
whose content is Restart. For further information, see Section 3.6.5, "Restart Phone".
4.14.3
Factory reset
This procedure resets all parameters to factory settings and reboots the phone. To start a fac-
tory reset, the Action has to be set to Restart, as with the regular phone restart. Additionally,
the special, fixed password must be provided in the restart-password item, and the
restart-type item must be set to FactoryReset. See the following snippet:
<Item name="restart-password">124816</Item>
<Item name="restart-type">FactoryReset</Item>
4.14.4
HPT interface
WBM Name
Disable HPT
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer's Guide
Item name
Type
Bool
remote-
trace-enable
Bool
trace-user-
notify
IP Num-
remote-
ber
trace-ip
Port
remote-
Number
trace-port
Item name
Type
Bool
enable-test-
interface
Phone Parameters - Administration
Values
Description
If enabled, syslog server
true/false
Default: false
will be used for remote
trace.
If enabled, the user gets a
true/false
Default: false
notification
Default: Null
Defines IP address of Re-
mote Server
Default: 514
Defines port number of
Remote Server
Values
Description
Used to disable test inter-
true/false
Default: true
face.
c04.fm
Maintenance
217
Advertisement
Table of Contents
