USC LPX Operator's Manual page 67

To access inside of atomizer housing, push up on the quick release handle and
slide back the atomizer (see picture below).

Slide back atomizer housing and grease
bearing inside. Bearing needs just one
pump of grease every 40 hours of use.

Clean any build-up inside the housing and
the atomizer head. To remove the
atomizer head, loosen the set screw
located on the bottom of the head.

Check for any play in the atomizer shaft.

Make sure the atomizer spins smoothly.

Ensure the adjustable chute is fitting
completely into the drum opening.
Adjust if necessary.
LPX AUTOMATED SEED TREATER
ATOMIZER
USC,
Bearing
LLC
Quick-Release
Handle
Atomizer Head
Set Screw
Page 67