Reports - USC LPX Operator's Manual

7. When all seed passes through the seed wheel, the seed wheel will turn off and
the pump will switch to recirculate. When more seed is fed into the treater, the
treating process will continue.
8. After all seed has been treated, the "SHUTDOWN"
button can be pressed. After the button has been
pressed, a window will appear notifying the operator that
the system will shut down after a specified amount of
time.
The following steps explain how reports are entered after a run has been completed.
1. After the "SHUTDOWN" button has been pressed, a
dialog box will appear (right), notifying the operator
that the data from the run is being saved.
2. Once the data has been saved, the operator will be brought to a reports screen
(left). Under the reports screen, the customers information and seed information
can be recorded and saved for later use. Press the EDIT button to change the
customer name, seed variety, and lot number. Pressing the cells next to each
piece of information will bring up a keypad which will allow the operator to enter in
the information. When finished the operator can press the "OK" button to save the
data. The "PRINT" button can be pressed to print the data for the customers
records. Then press the "X" in the top right corner of the screen to exit back to the
main screen.
Page 48
LPX AUTOMATED SEED TREATER

REPORTS

Edit
Button
USC,
LLC