USC LPX Operator's Manual page 11

1. Keep safety signs clean and legible at all times.
2. Replace safety signs that are missing or have become illegible.
3. Replaced parts that displayed a safety sign should also display the current sign.
4. Safety signs are available from your Authorized Dealer.
How to Install Safety Signs:

Be sure that the installation area is clean and dry.

Be sure temperature is above 50

Decide on the exact position before you remove the backing paper.

Remove the smallest portion of the split backing paper.

Align the sign over the specified area and carefully press the small portion
with the exposed sticky backing in place.

Slowly peel back the remaining paper and carefully smooth the remaining
portion of the sign in place.

Small air pockets can be pierced with a pin and smoothed out using the
piece of sign backing paper.
LPX AUTOMATED SEED TREATER
SAFETY SIGNS
Located on the USC equipment you will find safety labels.
Always be sure to read and follow all directions on the labels.
Guards provided with USC Seed Treater are to remain in
place during operation.
USC,
o o
F (10 C).
LLC
Page 11