USC LPX Operator's Manual page 31

LPX AUTOMATED SEED TREATER
H-O-A Button Descriptions
6. Pump Control Modules:
These modules control the function of the pumps. The
"HAND" button will place the desired pump in the manual mode of operation. The
"OFF" button will turn the associated device in the "OFF" mode of operation. The
"AUTO" button will place the device in the automatic mode of operation. The pump
will not operate in this function until the "STARTUP" button is pressed on the main
screen.
7. Drum Percent Speed:
When this button is
pressed, a numeric touch pad (right) will appear
to allow the operator to manually adjust the
speed of the drum.
8. Atomizer Percent Speed:
When this
button is pressed, a numeric touch pad (right)
will appear to allow the operator to manually
adjust the speed of the atomizer.
9. Auxiliary Control:
This module allows the operator
to control any unit which is plugged into the auxiliary
port located on the bottom of the treater main control
panel located on the seed treater. The "HAND" button
will allow the user to operate the unit in the manual
mode of operation. The "OFF" button will disconnect
control to the auxiliary port. The "AUTO" button will
place the unit in the automatic mode of operation. Any
unit plugged into the auxiliary port will not operate in this
function until the "STARTUP" button is pressed on the
main screen.
Auxiliary Port
10. Seed Wheel Percent Speed:
When this button is pressed, a numeric touch
pad (top, right) will appear to allow the operator to manually adjust the speed of the
seed wheel.
USC, Page 31
LLC