USC LPX Operator's Manual page 14

13. Connect any conveyors that are desired to
be controlled through the touch screen
control panel to the bottom of the treater
control panel.
.
14. Supply approximately 100 pounds of air
pressure to the center port of the air
actuated 3-way valve located on the pump
skid behind the electric control panel.
15. Connect a dedicated analog phone line to
the modem located in the top right portion
of the automated control panel. This will
allow USC remote access to the seed
treater to help diagnose situations that may
arise.
Page 14
LPX AUTOMATED SEED TREATER
USC,
LLC
Air Supplied Here
Analog Phone Line Hooked Up Here