Maintenance; Fuse - ILLKO REVEXmax S User Manual

REVEXmax - User's Manual
The three-phase adapters are produced in different versions:
P 8015 - Three-phase adapter, 16 A socket, 5 contacts
P 8016 - Three-phase adapter, 16 A socket, 4 contacts
P 8017 - Three-phase adapter, 32 A socket, 5 contacts
P 8018 - Three-phase adapter, 32 A socket, 4 contacts
7.5

Maintenance

Regularly check the technical safety and integrity of the insulation on the power
supply cord, plastic case and all accessories. The plastic case should not be polluted
with substances which can noticeably degrade the case's insulation quality.
Use soft cloth, slightly moistened with lukewarm soap water to clean the plastic
case. Do not spill cleaning liquid over the instrument! Do not use cleaning liquids
based on petrol, hydrocarbons, etc.
Wait until the instrument becomes totally dry before using it!
WARNING
Do not expose the instrument to temperatures over 70 C. If
this temperature is exceeded, the plastic case can be dam-
aged!
7.6

Fuse

The REVEXmax includes one fuse replaceable by user:
F 16 A / 500 V, 32 x 6.3 mm - power supply of the instrument. If the fuse has
blown, the REVEXmax does not turn on after connecting to mains voltage.
WARNING
Replace blown fuse with original one only, otherwise the
instrument may be damaged and/or operator's safety
impaired. It is not allowed to connect the instrument to
voltage without secured fuse cover.
Disconnect the REVEXmax from the mains before re-
placement of fuse!
c 2019 ILLKO, s.r.o.
www.illko.cz
7 Additional information
Page 60