ILLKO REVEXmax S User Manual page 53

REVEXmax - User's Manual 7 Additional information
HOLD function
By pressing and releasing the [ ] key, the last measured value is displayed even if
the measurement has either ended or is in progress. The HOLD function can be
cancelled (measurement is still in progress) by pressing and releasing the [ ] key.
Figure 23: HOLD function
Test sequence
After activation, the test sequence symbol is displayed (Figure 24).
Figure 24: Test sequence
Measured value is out of range
If the value is higher / lower then max. / min. range, the maximal / minimal
value is displayed with the symbol > "higher then" (Figure 25) or < "lower then"
(Figure 26).
Figure 25: Measured value is out of range (max)
Figure 26: Measured value is out of range (min)
c 2019 ILLKO, s.r.o.
Page 53
www.illko.cz