Table of Contents
Advertisement
User's Manual
5.2. Reset of the instrument
It is advised to execute instrument's RESET in case of any malfunction. Disconnect the
REVEXplus from mains, wait 30 s and plug it in again. If malfunction persists, contact your
local distributor.
5.3. Communication with PC (REVEXplus USB only)
The Hyperterminal program (which is standard component of Windows installation) is utilized
for communication with PC.
Information related to USB driver installation, Hyperterminal setup and communication are on
enclosed CD-ROM.
5.4. Maintenance
Regularly check the technical safety and integrity of insulation of power supply cord, plastic
case and all accessories. Plastic case should not be polluted with substances, which can
noticeably degrade case's insulation quality.
Use soft cloth, slightly moistened with lukewarm soap water for plastic case cleaning. Do not
spill cleaning liquid over the instrument! Do not use cleaning liquids based on petrol,
hydrocarbons etc. Wait until the instrument becomes totally dry before using it!
Do not expose the instrument to temperatures over 70 C, otherwise the plastic
case can be damaged!
5.5. Calibration and service
Calibration
Measuring instruments should be regularly calibrated. We recommend interval of calibration
2 years. Furthermore we recommend carrying out calibration after each repair.
Service
Unauthorized persons are not allowed to open the REVEXplus.
There are no replaceable components inside the instrument.
Any claims for guarantee will become invalid in the event of damage that results
from non-observance of the User's Manual. We do not accept responsibility for
such damage.
Contact your local distributor for further information.
Copyright © 2006–2019 ILLKO, s.r.o.
32
REVEXplus, REVEXplus USB
Advertisement
Table of Contents
