Table of Contents
Advertisement
REVEXmax - User's Manual
7 Additional information
7.2.4
Database information
The appliance has associated data about a performed measurement
When data transfer from the temporary memory to the main memory is performed,
then the symbol is displayed. The symbol is displayed even if no measurement has
been performed.
Figure 30: The appliance has associated data about a performed measurement
The appliance has associated data about a test sequence
The procedure is activated automatically after loading the appliance data from the
temporary memory to the main memory (see chapter 5.6).
Figure 31: The appliance has associated data about a test sequence
7.3
Reset of the instrument
It is advised to execute an instrument RESET in the event of a malfunction. Dis-
connect the REVEXmax from mains, wait 30 s and plug it in again. If problems
occur with the database system of REVEXmax, please reset the device and erase
the memory (see chapter 6.5.4).
Attention! All data stored in the main memory will be lost.
If malfunction persists, contact your local distributor.
c 2019 ILLKO, s.r.o.
Page 55
www.illko.cz
Advertisement
Table of Contents
