Modification Of The Id Number; Viewing Measured Values And Evaluation - ILLKO REVEXmax S User Manual

REVEXmax - User's Manual
When removing more records at once follow in a similar way - use the [Mark] key.
WARNING
Deleting records will not free up more space in the main memory.
The memory is released only when the complete memory is erased
(manually in the menu or before loading new data from the PC).
5.5.5 Modification of the ID number
Modification of ID number is performed as follows:
Press the [ ] or [ ] keys to open the database.
Use the [ ] or [ ] keys to highlight the ID number which should be modified.
Press the [menu] key.
Press the [Rename] key and insert a new ID – see chapter 5.3.
Press to the [ent] key to confirm or press [esc] to leave.
During the modification, the ID is checking if the new ID contains up
to 20 characters (a longer text is automatically reduced).
Furthermore, it is checked whether an appliance with the same ID
is already present in the database. If this situation occurs, the new
appliances' ID will not be saved and a message will be displayed (ID
is already in database).
5.5.6

Viewing measured values and evaluation

The record on the stored values of the appliance can be viewed as follows:
Press the [ ] or [ ] keys to open the database.
Use the [ ] or [ ] keys to highlight the ID number which should be viewed.
Press the [ent] key to open the file with the measured values and evaluation.
Use the [ ] or [ ] keys to display the results.
If the data file has not transferred from the temporary memory to the
main memory (the symbol V is not displayed), you cannot view the
measured values and their evaluation. Therefore, when you press the
[ent] key, you will hear a warning beep.
c 2019 ILLKO, s.r.o.
www.illko.cz
5 Database operations
Page 39