ILLKO REVEXmax S User Manual page 49

REVEXmax - User's Manual 7 Additional information
Empty database
When you try to view a list of appliances with an empty memory, then an acoustic
signal sounds and the display shows the warning message (Figure 12).
Figure 12: Warning message: Empty database
Memory usage
If the memory usage increase to 90%, then an acoustic signal sounds and the display
shows the warning message (Figure 13). If the memory is full (100%), then it is
necessary to erase the memory (see chapter 6.5.4) to continue to work with the
device (store new appliances).
Figure 13: Warning message: Memory usage
Measurement was cancelled
If the [esc] key was pressed during the measurement, then it will be cancelled. An
acoustic signal sounds and the display shows the warning message (Figure 14). The
measured value is not saved.
Figure 14: Warning message: Measurement was cancelled
c 2019 ILLKO, s.r.o.
Page 49
www.illko.cz