ILLKO REVEXmax S User Manual page 50

REVEXmax - User's Manual 7 Additional information
ID is already in database
When you enter an ID which is already in the database, then an acoustic signal
sounds and the display shows the warning message (Figure 15).
Figure 15: Warning message: ID is already in database
Test leads: Rpe >2.0 Ω
The maximum value of the test leads' resistance is 2.0 Ω. When you try to compen-
sate for a higher value, an acoustic signal sounds and the display shows the warning
message (Figure 16).
Figure 16: Warning message: Test leads: Rpe >2.0 Ω
Warning concerning of a point of danger
Read the User's Manual and observe all precautions! Symbol (Figure 17) highlights
the fact that it is necessary to follow the safety instructions in the manual.
A RISK OF INJURY OR DEVICE DAMAGE!
Figure 17: Warning concerning of a point of danger
c 2019 ILLKO, s.r.o.
Page 50
www.illko.cz