Measuring Of Power And Current Consumption By Means Of Current Clamp - ILLKO REVEXmax S User Manual

REVEXmax - User's Manual
4.8.2 Measuring of power and current consumption by means of current
clamp
WARNING
It is important to observe these principles for proper measurement:
Both the REVEXmax and the tested appliance must be powered from
identical phase.
Procedure:
Press the [9 Power] key repeatedly in order to select the external method.
The symbol
Connect the optional current clamp to the terminal 8.
Switch on the tested appliance's mains switch.
Enclose with current clamp's jaws live conductor L of the measured appliance.
Press the [TEST] key.
The last measured values are displayed after finishing the measurement.
Switch off the tested appliance's mains switch.
If the measured value of power is higher than the highest measurable value the
symbol >>>> appears.
c 2019 ILLKO, s.r.o.
is displayed.
www.illko.cz
4 Measurements
Page 32