Configure Guarding Vision; Add Network Cameras; Add Wi-Fi Cameras - HIKVISION DS-7100NI-K1/W/M Series Quick Start Manual

3.5.3 Configure Guarding Vision

Guarding Vision provides mobile phone application and platform service to access and manage
your connected devices, which enables you to get a convenient remote access to the surveillance
system.
Steps
1. Go to Menu → Configuration → Network → Platform Access.
2. Check Enable. The service terms will pop up.
1) Enter the verification code in Verification Code.
2) Scan the QR code to read the service terms and privacy statement.
3) Check The Guarding Vision service will require internet access. Please read Service Terms
and Privacy Statement before enabling the service if you agree the service terms and privacy
statement.
4) Click OK to save the settings.
Note
● Guarding Vision is disabled by default.
● The verification code is empty by default. It must contain 6 to 12 letters or numbers, and it is
case sensitive.
3. Optional: Check Custom to enter the server address as your desire.
4. Optional: Check Enable Stream Encryption, verification code is required for remote access and
live view.
5. Optional: Click Unbind if the device requires to unbind with the current Guarding Vision
account.
6. Click Apply.
What to do next
After configuration, you can access and manage your devices through Guarding Vision app or
website.

3.6 Add Network Cameras

Before you can get live video or record the video files, you shall add network cameras to the
device.

3.6.1 Add Wi-Fi Cameras

You can use Wi-Fi match function to search Wi-Fi cameras that are not activated, and add them to
the device automatically.
Select Wi-Fi Match from the right-click menu in live view mode, and the device will search and add
Wi-Fi cameras. The process will take about 2 minutes. The Wi-Fi camera will use IP Camera