Editing Ip Cameras Connected To The Built-In Switch Network Interfaces; Ds-7600Ni-Se/N Series Nvr) - HIKVISION 7600NI-SE Series User Manual

User Manual of DS-7600NI Series NVR
Figure 2. 25 Edit IP Camera Interface - Manual
3. Click the Apply button to finish adding.
2.3.4 Editing IP cameras connected to the built-in switch
network interfaces (Only for DS-7600NI-SE/N series
NVR)
For DS-7600NI-SE/N series NVR, the extra network interfaces provide a built-in switch with plug-and-play
function.
Example:
As for DS-7608NI-SE/N NVR, when you want to connect 2 online cameras and connect 6 network cameras via
built-in switch interfaces, you must disable 2 built-in switch interfaces in the Edit IP camera panel.
To add Cameras for NVR via built-in switch interfaces:
Before you start:
Connect the network cameras via the built-in switch interfaces.
Steps:
1. Enter the Camera Management interface.
Main menu> Camera> Camera
You can see the connected cameras are listed.
Note: The cameras connecting to the built-in switch interface cannot be deleted in this menu.
Figure 2. 26 Camera List
37